Door Handle Lever
Door handle lever Product description This Sliding Barn Door Handle Set is made from high quality steel and finished in a Matte Black Powdercoat so is both rust resistant and long lasting. Suitable for interior and exterior doors, this Barn Door Handle with Flush Door Pull looks amazing in the...
Door handle lever
This Sliding Barn Door Handle Set is made from high quality steel and finished in a Matte Black Powdercoat so is both rust resistant and long lasting. Suitable for interior and exterior doors, this Barn Door Handle with Flush Door Pull looks amazing in the home when partnered with a Rustic or Modern style Barn door. But this isn’t your typical Barn Door Handle...
One of the problems with other Barn Door Handle sets is that they tend to have at minimum a 1.27mm (0.5 inch) backplate welded over the finger pull opening, so to get the finger pull to sit flush with the Doors surface you need to cut a recess into your door. Most people cringe at the thought of hacking into their doors, so here’s how we solved it:
THE THINNEST BACKPLATE POSSIBLE - At an Ultra Slim 0.5mm (0.02 inches) and with the door pull against the doors surface, the 0.5mm gap is almost invisible.
But we didn’t stop there…
A TRUE FLUSH FINISH - Also included is a 1mm (0.04 inches) black EVA foam shim. Placing the shim between the finger pull and the doors surface will not only help protect your door and ensure a tight seal, but also fills the tiny 0.5mm gap between the door and the finger pull. Simple but effective!
VERSATILE - We understand that Barn doors can be made to a variety of thicknesses, so we included an extra set of M8 x 75mm screws so if your door is a little on the thicker side (up to 2 ½ inches) you won’t have to go searching the local hardware store trying to find screws that fit saving you time and frustration.
WHAT'S IN THE BOX:
1 x 305mm (12”) Round Tube Barn Door Handle Black
1 x 61mm (2.40”) x 221mm (7.91”) Finger Pull Black
2 x 60mm (2.36”) Screws - Recommended for door thicknesses between 35mm (1.37”) and 48mm (1.90”)
2 x 75mm (2.95”) Screws - Recommended for door thicknesses between 48mm (1.90”) and 63mm (2.50”)
2 x Handle Pads
1 x EVA Foam Shim Black
1 x L Wrench
Q: Which stainless steel barn door hardware is hot-saling products?
A: Model Top mount and 96" Track
Q: How long has Moran Hardware in Business?
A: Moran Hardware has been in business for approximately 10 years.
Q: Is there a key contact at Moran Hardware?
A: You can contact us at 0086-573-83875909. Skype: niuniuheyanyan1 Wechat: 86-15824360745
Q: What is your main products?
A: Our main products are sliding barn door hardware,barn door pulls, lever door handle.
Q: Can you please ship the goods to our warehouse?
A: Yes, we can.